top of page

Précuit

Le feutre précuit est obtenu en mélangeant des fibres textiles liées avec de la résine phénolique ou non phénolique en fonction du niveau de rigidité demandé. On peut éventuellement ajouter un produit ignifuge ou retardant qui détermine la résistance au feu. Ces feutres sont destinés au moulage.

Semi-durci - Feutre pour moulage

Semi-durci avec fibre de verre - Feutre pour moulage

Entièrement durci - Feutre pour isolation phonique / Découpé

IMG_6553_edited.jpg
IMG_6553_edited.jpg
Semi-cured

​Felts slightly bonded by uncured resin (for thermomoulding mats; optional scrims).

750g01_edited_edited.jpg
750g01_edited_edited.jpg

Felts with fibre glass content slightly bonded by uncured resin (for thermomoulding mats; optional scrims)

Semi-Cured with Fibre Glass
WhatsApp Image 2018-07-09 at 14.50.54.jp
Fulled-Cured

​Felts bonded by cured resin (mainly sound damping applications) roll, bale or die-cut pieces with optional scrim and/or other adhesive)

Feutre thermoplastique

IMG_6538.JPG
Fibre reinforced Thermoplastic

Fibre reinforced thermoplastic (mainly sound damping applications which can come in roll, bale or die-cut format with optional scrim and/or adhesive)

Feutre Thermoplastique avec Résine Epoxy polyester

IMG_7171.JPG
Fibre reinforced Thermoplastic with Epoxy resin

Fibre reinforced thermoplastic with additional epoxy resin binder (mainly sound damping applications which can come in roll, bale or die-cut format with optional scrim and/or adhesive)

Feutre aiguilleté

DSC00631.JPG
Needlepunch Felt

Felt made of textile fibres and thermoplastic needle punched fibres, optional with nonwoven. Raw material for parts shaped in a cold mould after heating.

Feutre cardé

DSC00598.JPG
Carded Felt

Felt made of textile fibres, bonded by thermoplastic binder, optional with nonwoven and / or adhesive. Raw material for parts shaped in a cold mould after heating and die-cut

Produits finis

Pièces découpées

Pièces moulées

IMG_6335.JPG
Die-cut

Felts produced have the option to be adhesive coated and/or die-cut into requested shapes stipulated by the customer. Each die-cut part will require a bespoke tool to be made to allow cutting.

IMG_6373_edited.jpg
IMG_6373_edited.jpg

Felts produced within Lacus Felt (Tier 2) are then passed to the next stage in the process to the Tier 1 customer, who will either die-cut or mould into the desired shape and rigidity and supply to the OEM involved.

Moulding
bottom of page